HP Hitachi Dynamic Link Manager Software - Manual (Page 459)

delete (Deletes a Path Dynamically)
The dlnkmgr command's delete operation batch-removes paths previously
deleted from the OS from the HDLM management targets. You can execute
this command dynamically without any effects on existing paths.
Format
To Delete a Path Dynamically
/opt/DynamicLinkManager/bin/dlnkmgr delete -path [-s]
To Display the Format of the delete Operation
/opt/DynamicLinkManager/bin/dlnkmgr delete -help
Parameters
To Delete a Path Dynamically
-path
Indicates that the target of the operation is a path managed by HDLM.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr delete -path
KAPL01161-I This operation will change the path configuration.
Do you want to continue? [y/n]:y
KAPL01165-I A path was deleted. (path ID = = 00010, storage =
HITACHI.HUS100.9100163, iLU = 0030)
:
KAPL01164-I Paths were deleted. (number of paths deleted = 2,
completion time = yyyy/mm/dd hh:mm:ss)
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr delete -path -s
KAPL01165-I A path was deleted. (path ID = = 00010, storage =
HITACHI.HUS100.9100163, iLU = 0030)
:
KAPL01164-I Paths were deleted. (number of paths deleted = 2,
completion time = yyyy/mm/dd hh:mm:ss)
Note:
Any paths excluded from the HDLM-management targets must be deleted
from the OS before executing this command. To delete paths, execute the
Command Reference
6-65
Hitachi Dynamic Link Manager User Guide for Linux ®