HP IP Distance Gateway - Manual (Page 121)

Table 26 Application modules—Error log messages (continued)
Description No. Log message ID
Target Login Response PDU (router
is target) in subsequent login PDUs.
iSCSI Login PDU was received with
an invalid TSIH value. The TSIH is 324 QLIS_LoginPduContinue: Session does not exist, invalid TSIH
0x%x 41284
invalid because there is no session
with that TSIH value.
CHAP validation failed during
login 393 QLIS_LoginPduContinue CHAP Validation Failure 41353
Unexpected CHAP key 394 QLIS_LoginPduContinue Unexpected CHAP key detected 41354
Failure to allocate object for "Set
Port Info" IOCTL processing. 548 QLBI_SetPortInfo: QLUT_AllocatePortalObject failed (PortType
0x%x, PortId 0x%x) 41508
PortType: 0 = FC, 1 = iSCSI.
PortId: 0 = FC1 or iSCSI1(GE1),
1 = FC2 or iSCSI2 (GE2).
The Inquiry command issued by
the mpx110 as part of its
discovery process failed. 666 QLBI_GetLunInfo: INQUIRY failed, TPB status 0x%x 41626
The Inquiry command issued by
the mpx110 as part of its
discovery process failed. 669 QLBI_GetLunInfo: QLBI_PassthruCommand failed for INQUIRY
(page code 0x83) 41629
The Inquiry command issued by
the mpx110 as part of its
discovery process failed. 675 QLBI_GetLunInfo: QLBI_PassthruCommand failed for READ
CAPACITY 41635
The Inquiry command issued by
the mpx110 as part of its
discovery process failed. 676 QLBI_GetLunInfo: READ CAPACITY failed, TPB status 0x%x 41636
The Pass Through command issued
by management application (such
as a GUI) was aborted. 736 QLBI_PassthruCommandCompletion: Passthru command
aborted 41696
The Pass Through command issued
by management application (such 740 QLBI_Passthru: Invalid CDB length %d bytes 41700
as a GUI) failed due to invalid
CDB length.
The Pass Through command issued
by management application (such 741 QLBI_Passthru: Invalid data length %d bytes 41701
as a GUI) failed due to invalid
data length.
The Pass Through command issued
by management application (such 757 QLBI_PassthruCommand: command interrupted or timed out 41717
as a GUI) was interrupted or timed
out.
IOCTL operation is unsupported
for the operation code identified
in the log message. 790 QLBI_Ioctl: ERROR: Operation (0x%x) not supported in this
mode 41750
The Inquiry command issued by
the mpx110 as part of its
discovery process failed. 808 QLBI_GetLunList: REPORT LUNS command failed 41768
The Inquiry command issued by
the mpx110 as part of its
discovery process failed. 809 QLBI_GetLunList: REPORT LUNS command failed with CHECK
CONDITION, SCSI STATUS 0x%02X 41769
Error log messages 121