HP IP Distance Gateway - Manual (Page 53)

Settings menu
The Settings menu includes the Broadcast option, which opens the Broadcast Settings option, as
shown in
Figure 28 (page 53) .
Figure 28 Settings menu
Wizards menu
The Wizards menu includes the following options, as shown in Figure 29 (page 53) :
•
FW Update Wizard—Launches the Firmware Update Wizard, which enables you to update
the mpx110 gateway’s firmware image. The firmware image is selected from a menu that
enables browsing.
•
FCIP Route Add—Launches the FCIP Route Add wizard, which enables you to select the
resources used for the route, the IP address of the remote FCIP peer, IP parameters, VLAN
support, compression, and bandwidth limit.
•
FCIP Route Remove—Launches the FCIP Route Remove wizard, which enables you to remove
an existing FCIP Route, freeing the resources (FC and GE ports) used by the route.
NOTE: Figure 29 (page 53) shows wizard menus not supported by the gateway at the time of
this document's release. Only wizards applicable to the mpx110 are described.
Figure 29 Sample Wizards menu
Overview 53