Document Outline

• HP IP Distance Gateway User Guide
• Contents
• 1 Overview
  • mpx110 product description
  • Optional equipment
  • FCIP overview
  • Using FCIP to encapsulate FC packets
  • Redundant FCIP network structure example
• 2 Configuration rules and guidelines
  • Supported configurations
  • HP Continuous Access P6000/EVA 3-site configurations
    • 3-site configuration with four mpx110 gateways
    • 3-site configuration with six mpx110 gateways
    • 3-site configuration with eight mpx110 gateways
    • 3-site configuration with six gateways and full inter-site connectivity
  • Configuration rules and guidelines
    • General configuration rules
    • Operating system and multipath support
    • P6000/EVA storage system rules and guidelines
      • P6000/EVA storage system software
    • P9000/XP storage system rules and guidelines
      • P9000/XP storage system software
    • Fibre Channel switch and firmware support
      • FC switch requirements
    • IP network requirements
  • IP performance tuning
    • Distance
    • Bandwidth per route
    • Latency
    • MTU/Jumbo frames
    • Compression
    • TCP window size/scaling performance tuning
      • Modifying the window size and scaling factor
      • TCP window size recommendations
• 3 Installation and upgrades
  • Verifying mpx110 requirements
  • Pre-installation checklist
  • Rack mounting the mpx110
  • Installing the SFPs
  • Management
    • Installing the management application
    • HP mpx Manager for Windows
    • HP mpx Manager for Linux
    • Setting mpx110 management port parameters
  • Configuring Fibre Channel switch settings for the mpx110
    • B-series Fibre Channel switch parameters
    • C-series Fibre Channel switch parameters
    • H-series Fibre Channel switch parameters
  • Configuring the mpx110 for connecting remote SANs
  • Configuring FCIP routes
  • Cabling the mpx110 Fibre Channel, GE, and management ports
  • Verifying FCIP links and firmware version
  • Firmware upgrades
    • Using the mpx Manager GUI to upgrade firmware
    • Using the CLI to upgrade firmware
    • Recovery process
  • Removal and replacement
    • Removing an mpx110
    • Replacing an mpx110
  • Services
  • Security
  • Diagnostics and troubleshooting
    • POST diagnostics
    • Heartbeat LED (green)
    • Input Power LED (green)
    • System Fault LED (amber)
    • Fibre Channel Port LEDs
• 4 Using the HP mpx Manager utility
  • Overview
    • Menu bar
    • File menu
    • View menu
    • Settings menu
    • Wizards menu
    • Help menu
    • Tool bar
    • Action menu
    • System tree window
    • mpx110 gateway
      • Information tab
      • Security tab
      • SNMP Management tab
    • FCIP routes
      • FCIP Route Info tab settings
  • Starting the mpx110 Manager GUI
  • Using wizards
    • Firmware Update Wizard
    • FCIP Route Add Wizard
    • FCIP Route Remove
• 5 Support and other resources
  • Related documentation
  • Conventions
    • Document conventions and symbols
  • HP technical support
  • Subscription service
  • Other HP websites
• A Command-line interface
  • Logging on to the mpx110
  • User accounts
  • Working with SAN mpx110 configurations
    • Modifying a configuration
    • Saving and restoring mpx110 configurations
    • Saving mpx110 configuration and persistence
    • Restoring mpx110 configuration and persistence
  • Commands
    • Admin command
    • Beacon command
    • Clear command
    • Date command
    • FcipRoute command
    • FRU command
    • Help command
    • History command
    • Image command
    • Logout command
    • Password command
    • Ping command
    • Quit command
    • Reboot command
    • Reset factory command
    • Save command
    • Set command
    • Set FC command
    • Set MGMT command
    • Set NTP command
    • Set Properties command
    • Set SNMP command
    • Set System command
    • Show command
    • Show FcipRoutes command
    • Show Logs command
    • Show Memory command
    • Show MGMT command
    • Show NTP command
    • Show Performance command
    • Show Properties command
    • Show SNMP command
    • Show Stats command
    • Show System command
    • Show Targets command
    • Show VLAN command
    • Shutdown command
    • Target command
    • Traceroute command
• B Log data
  • Informational log messages
    • Application modules
    • iSCSI driver
    • Fibre Channel driver
    • User modules
    • FCIP
    • TOE driver
    • System
  • Error log messages
    • Application modules
    • iSCSI driver
    • Fibre Channel driver
    • Error log messages in user modules
    • System
  • Fatal log messages
    • iSCSI driver
    • Fibre Channel driver
    • TOE driver
    • System
• C Simple Network Management Protocol
  • SNMP properties
  • SNMP trap configuration
  • Management Information Base
    • System information
      • qsrSerialNumber
      • qsrHwVersion
      • qsrSwVersion
      • qsrNoOfFcPorts
      • qsrNoOfGbEPorts
      • qsrAgentVersion
    • Network port table
      • qsrNwPorttable
      • qsrNwPortEntry
        • QsrNwPortEntry
      • qsrNwPortRole
      • qsrNwPortIndex
      • qsrNwPortAddressMode
      • qsrIPAddressType
      • qsrIPAddress
      • qsrNetMask
      • qsrGateway
      • qsrMacAddress
      • qstNwLinkStatus
      • qsrNwLinkRate
    • Fibre Channel port table
      • qsrFcPortTable
      • qsrFcPortEntry
        • QsrFcPortEntry
      • qsrFcPortRole
      • qsrFcPortIndex
      • qsrFcPortNodeWwn
      • qsrFcPortWwn
      • qsrFcPortId
      • qsrFcPortType
      • qsrFcLinkStatus
      • qsrFcLinkRate
    • Sensor table
      • qsrSensorTable
      • qsrSensorEntry
        • QsrSensorEntry
      • qsrSensorType
      • qsrSensorIndex
      • qsrSensorUnits
      • qsrSensorValue
      • qsrUpperThreshold
      • qsrLowerThreshold
      • qsrSensorState
  • Notifications
    • Notification objects
      • qsrEventSeverity
      • qsrEventDescription
      • qsrEventTimeStamp
    • Agent startup notification
    • Agent shutdown notification
    • Network port-down notification
    • Fibre Channel port-down notification
    • Sensor notification
    • Generic notification
• D Saving and restoring the mpx110 configuration
  • Saving the mpx110 configuration
    • Saving the configuration using the mpx110 GUI
    • Saving the configuration using the mpx110 CLI
  • Restoring the mpx110 configuration
    • Restoring the configuration using the mpx110 GUI
    • Restoring the configuration using the mpx110 CLI
• E Regulatory compliance and safety
  • Regulatory compliance
    • Federal Communications Commission notice for Class A equipment
      • Declaration of conformity for products marked with the FCC logo, United States only
      • Modifications
      • Cables
    • Regulatory compliance identification numbers
    • Laser device
      • Laser safety warning
      • Laser product label
    • International notices and statements
      • Canadian notice (avis Canadien)
      • Class A equipment
      • European Union notice
      • BSMI notice
      • Japanese notice
      • Korean notice
  • Safety
    • Battery replacement notice
    • Taiwan battery recycling notice
    • Power cords
    • Japanese power cord statement
• Glossary
• Index