Iscsi driver – HP IP Distance Gateway User Manual
Page 124
Table 26 Application modules—Error log messages (continued)
Description
No.
Log message
ID
FCIP allocate data buffers:
Duplicate allocation of DataBuffer
(0x%p)
2337
QLUT_AllocateFcipDataBuffers: Duplicate allocation of
DataBuffer (0x%p)
43297
FCIP allocate data buffer: Got
NULL PORTAL Object in map table
MEM LEAK!!!!!
2338
QLUT_AllocateFcipDataBuffer: Got NULL PORTAL Object in
map table MEM LEAK!!!!!
43298
FCIP de-allocate data buffer: Null
portal object in map table
2339
QLUT_DeallocateFcipDataBuffer: Null portal object in map
table
43299
FCIP create data buffer pool:
Allocation of 32K buffers from
LargeBufferPool failed
2340
QLUT_CreateFcipDataBufferpool: Allocation of 32K buffers
from LargeBufferPool failed
43300
Break up I/O: TPB allocation failed
2561
QLSC_BreakupVUIOAllocPhase: TPB allocation failed
43521
Break up I/O: Data buffer and TPB
allocation failed
2562
QLSC_BreakupVUIOAllocPhase: Data buffer and TPB
allocation failed
43522
iSCSI driver
lists error log messages common to both iSCSI ports, 1 (GE1) and 2 (GE2).
Log messages beginning with #0 apply to iSCSI port 1 (GE1), and log messages beginning with
#1 apply to iSCSI port 2 (GE2).
Table 27 iSCSI driver—Error log messages
Description
No.
Log message
ID
The iSCSI processor failed
firmware initialization.
262
#%d: QLUtmIoctlEnable: Initialize FW failed
73990
The iSCSI processor command to
enable a GE port failed.
318
#%d: QLPortUp: MBOX_CMD_SET_PORT_CONFIG %04x failed
%04x
74046
The iSCSI processor failed the
internal loopback test.
328
#%d: QLRunDiag: MBOX Diag test internal loopback failed %x
%x
74056
The iSCSI processor failed the
external loopback test.
329
#%d: QLRunDiag: MBOX Diag test external loopback failed %x
%x
74057
The iSCSI processor command to
disable a GE port failed.
337
#%d: QLPortDown: MBOX_CMD_SET_PORT_CONFIG %04x
failed %04x
74065
iSCSI FW did not send a valid
Continuation IOCB
340
#%d: QLUtmReceiveScsiCmd: Invalid ATIO Continuation type
%x
74068
Driver received an unsupported
pdu type with immediate data
address
341
#%d: QLUtmProcessResponseQueue: Immediate data addr
%08x:%08x in unsupported PduType
74069
The iSCSI processor could not
connect with the iSNS.
513
#%d: QLiSNSEnableCallback: iSNS Server TCP Connect failed
74241
The iSCSI processor reported that
the iSCSI port NVRAM contains
invalid data (checksum error).
849
#%d: QLIsrDecodeMailbox: NVRAM invalid
74577
Duplicate IP address is detected
on iscsi port %d
852
#%d: QLIsrDecodeMailbox: AEN %04x, Duplicate IP address
detected, MB[1-5] %04x %04x %04x %04x %04x
74580
The iSCSI processor reported a
link down condition.
859
#%d: QLIsrDecodeMailbox: Link down
74587
Driver received an invalid event
from iScsi FW
892
#%d: QLProcessAen: Invalid event %x
74620
124
Log data