HP IP Distance Gateway - Manual (Page 43)

7. Enter the local GE port IP address, subnet mask, gateway and the IP address of the remote
mpx110. Click Next to continue.
The TCP/IP Options screen appears.
8. Select the appropriate options for your configuration and ensure that the same options are
selected on the remote port as well. Click Next to continue.
The FCIP Option screen appears.
9. Select the appropriate options for your configuration and ensure that the same options are
selected on the remote port as well. Click Finish to continue.
The Security Check screen appears.
10. Enter the Admin password (default password is config). Click OK to continue.
A message appears, indicating that the process for adding FCIP routes is now complete.
Configuring FCIP routes 43