HP IP Distance Gateway - Manual (Page 91)

Image command
Provides for updating the mpx110’s firmware image and the cleanup (removal) of image files in
the mpx110’s /var/ftp directory.
Admin session Authority
image Syntax
cleanup
Removes any firmware image file in the mpx110’s /var/ftp directory. These are files
transferred by the user when updating the firmware image.
Parameters
list
Displays a list of the firmware image files in the mpx110’s /var/ftp directory.
unpack [<filename>]
Unpacks the firmware image file specified in the <filename> parameter and installs
the firmware image on the mpx110. The mpx110 must be rebooted for the new firmware
image to be activated. The firmware image file must first have been transferred to the
mpx110’s /var/ftp directory using FTP.
The following is an example of the image cleanup command: Examples
mpx110 (admin) #> image cleanup
The following is an example of the image list command:
mpx110 (admin) #> image listmpx110-2_0_3_2.bin
The following is an example of the image unpack command:
mpx110 (admin) #> image unpack mpx110-2_0_3_2.bin Unpack
Completed. A reboot is required for the FW to take
affect. Do you wish to reboot the System at the current
time (y/n): n
Logout command
Exits the CLI and returns the operator to the login prompt.
Admin session Authority
logout Syntax
The following is an example of the logout command: Example
mpx110 (admin) #> logout
(none) login:
Password command
Changes the guest and administrator passwords.
Admin session required only to set the command Authority
password Syntax
The following is an example of the password command: Example
mpx110 (admin)
#> passwd
Press 'q' and the ENTER key to abort this command.
Select password to change (0=guest, 1=admin): 1
account OLD password : ******
account NEW password (6-128 chars) : ******
please confirm account NEW password : ******
Password has been changed.
Commands 91