HP IP Distance Gateway - Manual (Page 23)

IP network requirements
HP requires that the following standards be met for the IP network:
•
Supported network protocols are TCP/IP IPv4 and IPv6 Ethernet 1,000 Mb/s.
See EVA storage system rules and guidelines (page 21) and XP storage system rules and
guidelines (page 22) for minimum IP bandwidth requirements.
•
For mpx110 IP data—Local and remote pairs are supported for up to 100 ms of IP network
delay one-way, or 200 ms round-trip for HP Continuous Access P6000. HP requires dedicated
IP bandwidth (see
Table 2 (page 24) ). For P9000 Continuous Access, the maximum distance
and delay is based on the replication mode. See “P9000/XP and VA storage system rules”
in the HP SAN Design Reference Guide.
•
For mpx110 IP management—LAN and WAN are supported.
Configuration rules and guidelines 23