HP IP Distance Gateway - Manual (Page 112)

Traceroute command
Tracks the route that packets take across an IP network on their way to an IP host.
Admin session Authority
traceroute Syntax
The following is an example of the traceroute command:
mpx239 (admin) #> tracerouteA list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER keyto accept the current value. To
Example
terminate this process before reaching the end of the list, press q or Qand the ENTER
key.IP Address (IPv4 or IPv6) [0.0.0.0] 44.44.1.240
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ] 1
Tracing route to 44.44.1.240 over a maximum of 30 hops:
1 44.44.1.240 201.4ms 100.2ms 100.2ms
Traceroute completed in 1 hops.
112 Command-line interface