Restoring mpx110 configuration and persistence – HP IP Distance Gateway User Manual
Page 82
Restoring mpx110 configuration and persistence
To restore the mpx110’s configuration and persistent data:
1.
Transfer the saved data from a workstation to the mpx110 by executing an FTP utility on the
workstation.
The following text is an example of an FTP transfer that will place previously saved mpx110
configuration data on the mpx110:
c:\>ftp 172.17.137.102
Connected to 172.17.137.102.
220 (none) FTP server (GNU inetutils 1.4.2) ready.
User (172.17.137.102:(none)): ftp
331 Guest login ok, type your name as password.
Password: ftp
230 Guest login ok, access restrictions apply.
ftp> bin
200 Type set to I.
ftp> put HP_StorageWorks_mpx110_FRU.bin
200 PORT command successful.
150 Opening BINARY mode data connection for
'HP_StorageWorks_mpx110_FRU.bin'.
226 Transfer complete.
ftp: 6168 bytes sent in 0.00Seconds 6168000.00Kbytes/sec.
ftp> quit
221 Goodbye.
2.
Execute the fru restore command (see
) to update the mpx110 with the saved
configuration data.
NOTE:
Always use the Full Configuration Restore with the mpx110.
82
Command-line interface