Commands – HP IP Distance Gateway User Manual
Page 83
Commands
The command syntax is as follows:
command
keyword
keyword [value]
keyword [value1] [value2]
The command is followed by one or more parameters. Consider the following rules and conventions:
•
Commands and parameters are not case sensitive.
•
Required keyword values appear in standard font: [value]. Optional values appear in
italics: [value].
•
Underlined portions of the keyword in the command format indicate the abbreviated form that
can be used. For example, the Delete keyword can be abbreviated Del.
The command-line completion feature makes entering and repeating commands easier.
lists the command-line completion keystrokes.
Table 18 Command-line completion keystrokes
Effect
Keystroke
Completes the command-line. Enter at least one character and press the Tab key to
complete the command-line. If more than one possibility exists, press the Tab key again
to display all possibilities.
Tab
Scrolls backward through the list of previously entered commands.
Up arrow
Scrolls forward through the list of previously entered commands.
Down arrow
Moves cursor to the beginning of the command-line.
Ctrl+A
Moves cursor to the end of the command-line.
Ctrl+E
The command set performs monitoring and configuration tasks. Commands related to monitoring
tasks are available to all account names. Commands related to configuration tasks are available
only within an Admin session. An account must have Admin authority to enter the admin start
command, which opens an Admin session. See
Commands
83