HP IP Distance Gateway - Manual (Page 90)

show chap
show fc [ <PORT_NUM> ]
show fciproutes [ <LINK_ID> ]
show features
show initiators [ fc | iscsi ]
show logs
show memory
show mgmt
show ntp
show perf [ byte | init_rbyte | init_wbyte | tgt_rbyte |
tgt_wbyte ] show statsshow system
show properties
show snmp
show stats
show system
show targets [ fc | iscsi ]
show vlan [ <PORT_NUM> ]
shutdown
target [ add | rm ]
History command
Displays a numbered list of the previously entered commands.
Admin session Authority
history Syntax
Closing a Telnet window during an Admin session does not release the session. In this
case, you must either wait for the Admin session to time out or use admin cancel
command. Notes
The following is an example of the history command: Example
mpx110 (admin) #> history
mpx110 (admin) #> history
1: admin start
2: help
3: history
mpx110 (admin) #>
90 Command-line interface