HP IP Distance Gateway - Manual (Page 105)

Show SNMP command
Displays the mpx110’s SNMP properties and any traps that have been configured.
None Authority
show snmp Syntax
The following is an example of the show snmp command: Example
QRouter #> show snmp
SNMP configuration ------------------------------
Read Community Public
Trap Community Private
System Location
System Contact
Authentication traps
System OID 1.3.6.1.4.1.3873.1.4
System Description HP mpx110
Trap Destination 1
IP Address 10.0.0.5
Trap Port 1024
Trap Version 2
Commands 105