Replacing dimms, Figure 5–7 cache-module memory configurations, Table 5–1 cache module memory configurations – HP Array Controller HSG V8.7 Software User Manual
Page 238: Replacing dimms –42, Cache-module memory configurations –42, Cache module memory configurations –42
5–42
HSG80 User’s Guide
Replacing DIMMs
Use the following steps in “Removing DIMMs” and “Installing
DIMMs” to replace DIMMs in a cache module. The cache module may
be configured as shown in Figure 5–7 and Table 5–1.
Figure 5–7 Cache-Module Memory Configurations
Table 5–1 Cache Module Memory Configurations
Note If a DIMM fails, note which DIMM you need to replace based on
the diagram that displays on the console.
Memory
DIMMs
Quantity
Location
64 MB
32 MB
2
MC0-1 and MC1-3
128 MB
32 MB
4
MC0-1, MC0-2,
MC1-3, and MC1-4
256 MB
128 MB
2
MC0-1 and MC1-3
512 MB
128 MB
4
MC0-1, MC0-2,
MC1-3, and MC1-4
MC0-1
MC0-2
MC1-3
MC1-4
MC0-1
MC0-2
MC1-3
MC1-4
CXO6288A
64MB configuration (2 x 32 MB)
256 MB configuration (2 x 128 MB)
128 MB configuration (4 x 32 MB)
512 MB configuration (4 x 128 MB)