HP Array Controller HSG V8.7 Software - Manual (Page 433)

LED Codes C–9
■ ● ●❍ ❍ ❍ ❍ 30 The JSRAM battery is bad Replace controller
■ ● ●❍ ❍ ● ❍ 32 First-half diagnostics of the Time of
Year Clock failed Replace controller
■ ● ●❍ ❍ ● ● 33 Second-half diagnostics of the Time of
Year Clock failed Replace controller
■ ● ●❍ ●❍ ● 35 The processor bus-to-device bus bridge
chip is bad Replace controller
■ ● ●● ❍ ● ● 3B There is an unnecessary interrupt
pending Replace controller
■ ● ●● ● ❍ ❍ 3C There was an unexpected fault during
initialization Replace controller
■ ● ●● ● ❍ ● 3D There was an unexpected maskable
interrupt during initialization Replace controller
■ ● ●● ● ●❍ 3E There was an unexpected NMI during
initialization Replace controller
■ ● ●● ● ●● 3F An invalid process ran during
initialization Replace controller
Table C–2 Flashing OCP Patterns (Continued)
Pattern
OCP
Code
Error Repair Action