HP Array Controller HSG V8.7 Software - Manual (Page 361)

CLI Commands B–89
RENAME
Renames a specified container or a specified host connection.
Syntax
RENAME old-name new-name
Parameters
old-name
Specifies the existing name of the container or host connection.
new-name
Assigns the new name for the container or the host connection.
See “Command Syntax,” page B–5, for information regarding container
naming rules.
A name of a host connection can be any combination of letters and
numbers, with the one restriction that it cannot take the form of the
default assigned by the controller (!NEWCONnn).
Note Units may not be renamed.
Example
This example shows how to rename DISK10000 to MYDISK:
SHOW DISKS
Name Type Port Targ Lun Used by
-------------------------------------------------------------
DISK10000 disk 1 0 0 D100
DISK10100 disk 1 1 0 D101
RENAME DISK10000 MYDISK
SHOW DISKS
Name Type Port Targ Lun Used by
-------------------------------------------------------------
MYDISK disk 1 0 0 D100
DISK10100 disk 1 1 0 D101