HP Array Controller HSG V8.7 Software - Manual (Page 415)

CLI Commands B–143
SHOW
Displays information about controllers, storagesets, devices, partitions,
and units.
The SHOW command may not display some information for devices
accessed through the companion controller in a dual-redundant
configuration. When information regarding a device or parameter does
not appear, enter the same SHOW command from a terminal on the
other controller.
Syntax
SHOW connection
SHOW controller
SHOW device-name
SHOW device-type
SHOW EMU
SHOW storageset-name
SHOW storageset-type
SHOW unit-number
SHOW UNITS
Parameters
connection
Shows the following connection information: connection name,
operating system, controller, controller port, adapter ID address, online
or offline status, and unit offset.
controller
Specifies the controller to be displayed.
THIS_CONTROLLER
OTHER_CONTROLLER
device-name
Specifies the name of a particular device to be displayed. For example,
SHOW DISK20100 displays information about the device named
DISK20100.