HP LaserJet M9059 Multifunction Printer series - Manual (Page 117)

2. Slide the stapler unit toward you.
Figure 7-7 Load staples in the multifunction finisher (2 of 8)
3. Turn the large green knob until the blue dot appears in the window of the stapler unit.
Figure 7-8 Load staples in the multifunction finisher (3 of 8)
4. Turn the small green knob at the top of the stapler unit clockwise until the staple cartridge moves
to the left of the stapler unit.
Figure 7-9 Load staples in the multifunction finisher (4 of 8)
CAUTION: The blue dot must appear in the window of the stapler unit before you remove the
staple cartridge. If you try to remove the staple cartridge before the blue dot appears in the window,
you could damage the finisher.
5. On the empty staple cartridge, squeeze the tabs together and pull the empty cartridge out.
Figure 7-10 Load staples in the multifunction finisher (5 of 8)
ENWW Staple documents 103