HP LaserJet M9059 Multifunction Printer series - Manual (Page 223)

Specks
Figure 12-71 Specks
Specks might appear on a page after a jam has been cleared.
1. Print a few more pages to see if the problem corrects itself.
2. Clean the inside of the device and run a cleaning page. See Clean the MFP on page 161 .
3. Try using a different type of media.
4. Check the print cartridge for leaks. If the print cartridge is leaking, replace it.
Dropouts
Figure 12-72 Dropouts
1. Make sure that the environmental specifications for the device are being met. See Operating
environment on page 236 .
2. If the media is rough, and the toner easily rubs off, open the Administration menu at the device
control panel. Open the Print Quality menu, select Fuser Modes , and then select the media type
you are using. See Print Quality menu on page 42 .
3. Try using a smoother media.
ENWW Solve print-quality problems 209