Country/region specific statements, Declaration of conformity, 244 appendix c regulatory information enww – HP LaserJet M9059 Multifunction Printer series User Manual
Page 258
Country/region specific statements
Declaration of Conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer's Name:
Hewlett-Packard Company
DoC#: BOISB-0403-01-rel.3.0
Manufacturer's Address:
11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name:
HP LaserJet 9040MFP / 9050MFP / 9059MFP series
Accessories
4)
:
2000 sheet input feed unit (C8531A); Multifunction finisher (C8088A); 3000 sheet stacker
(C8084A); 3000 sheet stacker/stapler (C8085A)
8-bin mailbox (Q5693A)(GUADA-0401-00)
BOISB-0308-00 – Fax Module
Regulatory Model
2)
:
BOISB-0403-01
Product Options:
All
Toner Cartridge
C8543X, CE266C
conforms to the following Product Specifications:
Safety:
IEC 60950-1:2001 / EN60950-1: 2001 + A11
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC:
CISPR22:2005 / EN 55022:2006 - Class A
1, 3)
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class A / ICES-003, Issue 4
GB9254-1998, GB17625.1-2003
Telecom:
TBR-21:1998, EG 201 121:1998
Supplementary Information:
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC Annex II, EMC Directive 2004/108/EEC and the Low
Voltage Directive 2006/95/EEC, and carries the CE-Marking
accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name
or the product number(s).
3) The product meets the requirements of EN55022 & CNS13438 Class A in which case the following applies: “Warning – This is a class A
product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measures”.
4) All worldwide module approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number BOISB-0308-00
incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.
Boise, Idaho , USA
March 2009
For regulatory topics only,
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Straße 140, D-71034 Böblingen, Germany, (FAX: +49-7031-14-3143),
USA Contact:
Product Regulations Manager, Hewlett-Packard Company,, PO Box 15, Mail Stop 160,, Boise, Idaho 83707-0015, USA,
(Phone: 208-396-6000)
244 Appendix C Regulatory information
ENWW