HP LaserJet M9059 Multifunction Printer series - Manual (Page 168)

Upload a file to the printer
Send a file from the computer to the printer. The action that the printer takes depends on the type of file
that is being sent to it. For example, when a print-ready file (such as a .PS or .PCL file) is sent, the printer
prints the file.
1. Open the HP Printer Utility.
2. In the Configuration Settings list, select File Upload.
3. Click Choose, navigate to the file that you want to upload, and then click OK.
4. Click Upload to load the file.
Update the firmware
Update the printer firmware by loading the new firmware file from the computer. You can find new
firmware files for your printer at
www.hp.com/go/ljm9059mfp_firmware .
1. Open the HP Printer Utility.
2. In the Configuration Settings list, select Firmware Update.
3. Click Choose, navigate to the firmware file that you want to upload, and then click OK.
4. Click Upload to load the firmware file.
Activate the two-sided printing (duplexing) mode
Turn on the two-sided printing feature on printers equipped with automatic duplexers.
1. Open the HP Printer Utility.
2. In the Configuration Settings list, select Duplex mode.
3. Select Enable Duplex Mode to activate the two-sided printing mode, and then click Apply Now.
Lock or unlock printer storage devices
Manage access to printer storage devices from the computer.
1. Open the HP Printer Utility.
2. In the Configuration Settings list, select Lock Resources.
3. On the Control Panel Access Level pop-up menu, select the access level that you want to set
for the printer control panel.
4. Select the devices that you want to lock, and clear any devices that you want to unlock.
5. Click Apply Now.
154 Chapter 11 Manage and maintain ENWW