HP LaserJet M9059 Multifunction Printer series - Manual (Page 59)

Menu item Sub-menu item Sub-menu item Values Description
Paper Path Test Print Test Page Print Generate a test page for testing the paper-
handling features. Define the path for the test
in order to test specific paper paths.
Source All trays
Tray 1
Tray 2
(Additional trays are
shown, if applicable.)
Specify whether the test page is printed from
all trays or from a specific tray.
Destination All bins
Stacker Bin
Standard Output Bin
Select the output option for the test page.
Send the test page to all output bins or only
to a specific bin.
Duplex Off (default)
On
Select whether the duplexer should be
included in the test.
Copies 1,10,50,100,500
Default=1
Select how many pages should be sent from
the specified source as part of the test.
Service Test Follow the on-screen
instructions. Provides a series of prompts that the user can
follow to discover if the printer is functioning
properly. It also makes sure that paper is not
in the paper path.
Print/Stop Test Continuous value
from 0 to 60,000
milliseconds.
Default: 0 Isolate faults by stopping the device during
the print cycle and observing where in the
process the image degrades. To run the test,
specify a stop time. The next job that is sent
to the device stops at the specified time in the
process.
Scanner Tests A service technician can use this menu item
to diagnose potential problems with the
device scanner.
Control Panel LEDs Verify that the components of the control
panel are functioning correctly.
Display
Buttons
Touchscreen
Table 2-16 Troubleshooting menu (continued)
ENWW Use the Administration menu 45