HP LaserJet M9059 Multifunction Printer series User Manual
Page 99
5.
Adjust the left paper guide by pressing the tab on the guide and slide the guide until it gently touches
the paper
Figure 6-12
Load undetectable standard-size paper in trays 2, 3, and 4 (3 of 6)
6.
Adjust the front paper guide by pressing the tab on the guide and slide the guide until it gently
touches the paper.
Figure 6-13
Load undetectable standard-size paper in trays 2, 3, and 4 (4 of 6)
NOTE:
When loading tray 4, make sure that the paper guide lock is in the up position.
7.
Set the Custom/Standard switch to Custom.
Figure 6-14
Load undetectable standard-size paper in trays 2, 3, and 4 (5 of 6)
8.
Close the tray. The MFP control panel might show the tray media type and size. If the configuration
is not correct, touch
Modify
on the control panel. If the configuration is correct, touch
OK
.
Figure 6-15
Load undetectable standard-size paper in trays 2, 3, and 4 (6 of 6)
Load custom media in trays 2, 3, and 4
Use the following procedure to load custom-size paper in the tray.
ENWW
Load paper and print media
85