Print quality menu, 42 chapter 2 control panel enww – HP LaserJet M9059 Multifunction Printer series User Manual

Page 56

Advertising
background image

Print Quality menu

Administration > Print Quality

NOTE:

Values shown with "(default)" are the factory-default values. Some menu items have no default.

Table 2-15

Print Quality menu

Menu item

Sub-menu item

Values

Description

Set Registration

Test Page

Print (button)

Print a test page for setting the registration. Follow the
instructions that are printed on the page to adjust each
tray.

Source

All trays

Tray <X>: <contents>
Tray <X>: <contents>
(choose a tray)

Use

Set Registration

to shift the margin alignment to

center the image on the page from top to bottom and
from left to right. You can also align the image on the
front with the image printed on the back.

Select the source input tray for printing the

Set

Registration

page.

Adjust Tray <X>

Shift from -20 to 20 along
the X or Y axes.

0

is the

default.

Perform the alignment procedure for each tray.

When it creates an image, the device scans across the
page from side to side as the sheet feeds from top to
bottom into the device.

Fuser Modes

Standby Fuser Mode

125° Celsius

Off

Set the temperature of the fuser when the MFP is in
standby mode.

<Paper Type>

Configure the fuser mode associated with each media
type.

Restore Modes

Restore

(button)

Restore the fuser modes to the default settings.

Resolution

300

600

FastRes 1200 (default)

ProRes 1200

Use this feature to select the print resolution.

REt

Off

Light

Medium (default)

Dark

Enable Resolution Enhancement technology (REt),
which produces print output with smooth angles,
curves, and edges. All print resolutions, including
FastRes 1200, benefit from REt.

Economode

Enabled

Disabled (default)

When Economode is enabled, the device prints with a
reduced amount of toner per page; however, the print
quality of the page is reduced.

Toner Density

Choose from a range of 1
to 5.

3

is the default.

Lighten or darken the print on the page. 1 is the lightest
and 5 is the darkest.

Small Paper Mode

Normal (default)

Slow

Choose

Slow

to adjust the MFP for printing narrow

media.

42

Chapter 2 Control panel

ENWW

Advertising