Configuring a controller – HP Smart Storage Administrator User Manual
Page 24
Operations 24
Item
Tasks
Unused space
Create Logical Drive
More Information
Physical drive
Erase Drive**
View Status Alerts
Unassigned
drives
Create Array
More Information
*This task is not available on all controller models.
**If performed with an HP Smart Array G6 or G7 controller, this task requires a registered SAAP license key or a
controller where SAAP functionality is standard. See "About SAAP (on page
)."
†If performed with a Gen8 controller, this task requires a registered HP SmartCache license key.
Configuring a controller
1.
Open HP SSA.
For more information, see "Using the HP SSA GUI (on page
)."
2.
Open the Configure panel by doing one of the following:
o
Choose a device and click Configure in the quick navigation menu.
o
Select an available device from the Home screen, and then click Configure under the available
options.
The Configure panel appears.
IMPORTANT:
Screens may have different options available, depending on the server
configuration.
3.
Configure the controller. See "Performing a Configuration task (on page
)."
4.
When prompted, save the configuration.