HP Smart Storage Administrator - Manual (Page 97)

Operations 97
Error code Error message Comment or clarification
2880 Invalid Physical Disk Type Specified —
2882 Invalid MNP delay The specified value for MNP delay is invalid.
2883 Invalid Cache Logical Drive The specified caching logical drive ID is invalid.
2884 Invalid Caching Array The specified caching array ID is invalid.
2885 Error creating Caching Logical Drive —
2886 Error creating Caching Array —
2887 Error modifying Caching Volume —
2888 Unable to modify Caching Arrays Caching arrays cannot be modified once created.
2889 The requested Array modification is invalid Error specifying the list of drives when reconfiguring
an array
3000 Invalid Option The value of the option supplied to this parameter is
invalid.
3001
Invalid Command The command is invalid.
3002 Command Failed The controller returned an error for a command.
3003 License Key Delete Failed HP SSA is unable to delete the license key.
3004 Invalid Sector Size —
3005 Cannot delete Array —
3006 Invalid Number of Parity Groups —
3007 Chassis name is too long —
3008 Chassis name is already in use Another controller is already using the entered
chassis name.
3009 Auto Configure failed The Auto Configure mode was unable to complete
auto configuration.
3010 Cannot extend logical drive, not enough
free space for the requested size —
3011 Cannot extend logical drive, requested size
is too small
—
3012 Cannot specify both SIZE and SHRINKSIZE The input file cannot specify both a SIZE and
SHRINKSIZE parameter.
3013 Cannot shrink Array The array shrink operation was not successful.
3014 Cannot move Array The array move operation was not successful.
3015 Invalid operation - Advanced Pack support
required The requested operation requires a valid license key
to be entered.
3016 Spare drives cannot be specified by a count
in Reconfigure mode
When in Reconfigure mode, the requested spare
drives must be specified by their addresses. A simple
count cannot be used.
3017 Disk drives cannot be specified by a count in
Reconfigure mode When in Reconfigure mode, the requested data
drives must be specified by their addresses. A simple
count cannot be used.
3018 Invalid number of physical disks —