Using the hp ssa cli – HP Smart Storage Administrator User Manual
Page 46
Operations 46
The Actions panel for Array Diagnostic Report appears.
5.
Click one of the task buttons:
o
If you select View Diagnostic Report, the report appears. When you are finished viewing the current
report, click Close or Save.
If you select Save Diagnostic Report, wait for the report to generate, and then click Close Report or Save
Report.
For more information about reports and viewing them in a browser, see the following sections:
•
"Reported information (on page
•
"Identifying and viewing diagnostic report files (on page
•
"Identifying and viewing SmartSSD Wear Gauge report files (on page
Using the HP SSA CLI
Access HP SSA with one of the many methods available:
•
Accessing HP SSA in the offline environment (on page
•
Accessing HP SSA in the online environment (on page
Some HP SSA CLI features are only available in the offline environment, such as setting the boot controller
and boot volume.
HP SSA CLI has two operating modes:
•
Console mode ("
Opening the CLI in Console mode
" on page
You can adjust several configuration parameters on several devices without having to restart HP SSA
each time.