HP Smart Storage Administrator - Manual (Page 99)

Operations 99
Error code Error message Comment or clarification
3046 This command is only available when
running offline
The operation requested cannot be performed
online. Boot to offline SSA Scripting and supply the
-offline parameter.
3047 Caching Volume parameters are not valid
for a data Volume
The parameters supplied are not applicable or valid.
3048 Invalid Spare Mode —
3049 Encryption Login Failed —
3050 Encryption Login command is not available —
3051 The Encryption command is not available —
3052 The Zeroize command failed The controller firmware returned an error when
attempting to set zeroize the encryption
configuration.
3053 The Firmware Lock/Unlock failed The controller firmware returned an error when
attempting to lock or unlock the firmware.
3054 Unable to change the Key Manager Mode The controller firmware returned an error when
attempting to change the key manager mode.
3055 Unable to set the Key Encrypting Key The controller firmware returned an error when
attempting to set Key Encrypting Key name.
3056 Unable to set the boot password The controller firmware returned an error when
attempting to set the boot password.
3057 Unable to set the boot password state The controller firmware returned an error when
attempting to set the boot password state.
3058 The controller does not support encryption An attempt was made to execute an encryption
command on a controller which does not support
encryption.
3059 Controller Encryption is disabled An attempt was made to execute an encryption
command when encryption was disabled.
3060 Login required for this Encryption command A login is required before the encryption command
can be attempted.
3061 Plaintext volumes are not allowed The option to create future plaintext volumes was not
selected when initially configuring the encryption
configuration.
3062 Rekey of the encrypted volume failed The controller firmware returned an error when
attempting to rekey the selected logical volume.
3063
Plaintext to Ciphertext conversion of the
volume failed
The controller firmware returned an error when
attempting to convert the logical volume from
plaintext to ciphertext.
3064 Instant Secure Erase failed The controller firmware returned an error when
attempting to perform an Instant Secure Erase
operation on the selected logical volume.
3065 Error changing the Controller Encryption
Mode
The controller firmware returned an error when
attempting to change the encryption mode (on/off).
3066 Error - you must indicate acceptance of the
End User License Agreement (EULA) using
ACCEPTEULA=YES
—
3067
Unable to set the password An attempt to set the encryption password failed.
3068 Unable to set the Recovery question/answer An attempt to set the encryption recovery
question/answer pair failed.
3100
SSD Smart Path is not supported —