HP LaserJet 4000 Printer series - Manual (Page 139)

B-4 Control Panel Menus
EN
64#;6;2'
2.#+0
For supported
paper types, see
page A-5. This item appears only when a third paper tray
is installed. Set the value to correspond with
the paper type currently loaded in Tray 3.
64#;6;2'
2.#+0
For supported
paper types, see
page A-5. This item appears only when a fourth paper tray
is installed (available only on the HP LaserJet
4000 T/4000 TN printers). Set the value to
correspond with the paper type currently
loaded in Tray 4.
/#07#.(''& 1(( 1((
10
Feed the paper manually from Tray 1, rather
than automatically from a tray. When
/#07#. (''& 10
and Tray 1 is empty, the
printer goes offline when it receives a print job
and displays
/#07#..;(''& =2#2'4
5+<'?
.
For more information, see page 51.
&72.': 1(( 1((
10
This item appears only when an optional
duplexer is installed. Set the value to
10
to print
on both sides (duplex) or
1((
to print on one
side (simplex) of a sheet of paper.
For more information, see page 31.
$+0&+0)
.10)'&)'
.10)'&)'
5*146'&)'
This item appears only when an optional
duplexer is installed and the duplex option is
on. Choose the binding edge when duplexing
(printing on both sides of paper).
For more information, see page 31.
18'44+&'#9+6*
.'66'4 01
01
;'5
Choose
;'5
to print on letter size paper when
an A4 job is sent, but no A4 size paper is loaded
in the printer (or to print on A4 size paper when
a letter job is sent, but no letter paper is loaded
in the printer).
%10(+)74'(75'4
/1&'/'07 01
01
;'5
Configure the fuser mode associated with each
paper type. (This is only necessary if you are
experiencing problems printing on certain
paper types.)
01
: The fuser mode menu items are not
accessible.
;'5
: Additional items appear (see below).
Note
To see the default fuser mode for each paper
type, select
;'5
, scroll back to the Information
Menu, and print a menu map (page B-2).
Paper Handling Menu (Continued)
Item Values Explanation