HP LaserJet 4000 Printer series - Manual (Page 144)

EN
Control Panel Menus B-9
:&+/'05+10
+0%*'5
(110V printers)
or
/+..+/'6'45
(220V printers)

to

+0%*'5
(110V printers)
or

to

/+..+/'6'45
(220V printers)
This item appears only when
%10(+)74'
%7561/2#2'4 ;'5
. Select the
dimension to be fed into the printer (short
edge).
;&+/'05+10
+0%*'5
(110V printers)
or
/+..+/'6'45
(220V printers)

to

+0%*'5
(110V printers)
or

to

/+..+/'6'45
(220V printers)
This item appears only when
%10(+)74'
%7561/2#2'4 ;'5
. Select the other
dimension (long edge).
14+'06#6+10
21464#+6
21464#+6
.#0&5%#2'
Determine the default orientation of print on
the page.
Note
It is best to set the page orientation from the
printer driver or software application.
(Driver and software settings override
control panel settings.)
(14/ .+0'5
(110V printers)
or
.+0'5
(220V printers)

to

Sets vertical spacing from 5 to 128 lines for
default paper size. Press
[-Value+] once to
change the setting by increments of 1, or
hold down
[-Value+] to scroll by increments
of 10.
2%.(1065174%'
+06'40#.
+06'40#.
51(6
5.16
or

+06'40#.
: Internal fonts.
51(6
: Permanent soft fonts.
5.16
or

: Fonts stored in one of
the three DIMM slots.
2%.(10607/$'4


to

The printer assigns a number to each font
and lists them on the PCL Font List
(page 96). The font number appears in the
Font # column of the printout.
2%.(1062+6%* 


to

This item might not appear, depending on
the font selected. Press
[-Value+] once to
change setting by increments of .01 for
pitch, or hold down
[-Value+] to scroll by
increments of 1.
Printing Menu (Continued)
Item Values Explanation