HP LaserJet 4000 Printer series - Manual (Page 26)

EN
Chapter 1: Printer Basics 15
Software for Windows
Use the Typical Install or Custom Install option to install the HP
software. (This includes several printer drivers. For more
information, see page 13.)
Note Network Administrators: If the printer is attached to a network,
before you can print, the printer must be configured for that network
using HP JetAdmin or similar network software. (See the getting
started guide.)
Access the Windows Printer Driver
To configure the driver, access it in one of the following ways:
Note Settings in the printer driver and software application override
control panel settings. (Software application settings override
printer driver settings.)
Operating System
Temporarily Change Settings
(from a software application) Change Default Settings
(across all applications)
Windows 95 and
Windows NT 4.0 From the File menu, click Print,
and then click Properties. (The
actual steps can vary; this is the
most common method.) Click the Start button, point to
Settings, and then click Printers.
Right-click the printer icon, and
choose Properties.
Windows 3.1x and
Windows NT 3.51 From the File menu, click Print,
click Printers, and then click
Options. (The actual steps can
vary; this is the most common
method.) From the Windows control panel,
double-click Printers, highlight
the printer, and click Setup.