HP LaserJet 4000 Printer series - Manual (Page 84)

EN
Chapter 4: Problem Solving 73
%*'%-+0276
&'8+%'
alternates with
2#2'42#6*12'0
2.'#5'%.15'+6
The optional input tray cannot feed paper to the printer because a
door or paper guide is open.
Check the doors and paper guides.
%*15'0.#0)7#)'
016#8#+.#$.'
A print job requested a printer language that does not exist in the
printer. The job will not print and will be cleared from memory.
Print the job using a driver for a different printer language, or add the
requested language to the printer (if available).
Press [Go] to continue.
&+5-&'8+%'
(#+.74'
The EIO disk had a critical failure and can no longer be used.
Remove the EIO disk and replace it with a new one.
&+5-(+.'
12'4#6+10(#+.'&
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
&+5-(+.'
5;56'/+5(7..
Delete files from the EIO disk and then try again, or add a flash disk
DIMM. Download or delete files from HP JetAdmin, and download or
delete fonts from HP FontSmart. (See the software help for more
information.)
&+5-+5
94+6'2416'%6'&
The EIO disk is protected, and no new files can be written to it.
Disable the write protection through HP JetAdmin.
'08(''&'4.1#&
=6;2'?=5+<'?
Load the requested envelope type and size into the envelope feeder.
Make sure the envelope size and type are set correctly from the Paper
Handling Menu in the printer’s control panel.
Press [Go] if the desired envelope is already loaded in the feeder.
Press [-Value+] to scroll through the available types and sizes. Press
[Select] to accept the alternate type or size.
(.#5*&'8+%'
(#+.74'
The flash disk DIMM had a critical failure and no longer can be used.
Remove the flash disk DIMM and replace it with a new one.
Printer Messages (Continued)
Message Explanation or Recommended Action