HP LaserJet 4000 Printer series - Manual (Page 143)

B-8 Control Panel Menus
EN
Printing Menu
Some items in this menu can be accessed from a software
application, or from the printer driver (if the appropriate driver is
installed). Printer driver and software application settings override
control panel settings. For more information, see page 48.
Printing Menu
Item Values Explanation
%12+'5  
to

Set the default number of copies by
selecting any number from 1 to 999. Press
[-Value+] once to change the setting by
increments of 1, or hold down [-Value+] to
scroll by increments of 10.
Note
It is best to set the number of copies from
the printer driver or software application.
(Driver and software settings override
control panel settings.)
2#2'4
.'66'4
(110V printers)
and
'08'.12'
%1/
(110V printers)
For supported paper
sizes, see page A-3. Set the default image size for paper and
envelopes. (The item name will change
from paper to envelope as you scroll
through the available sizes.)
Note
The defaults indicated here are for 110V
printers. The default paper size for 220V
printers is
#
. The default envelope size for
220V printers is
&.
.
%10(+)74'%7561/
2#2'4 01
01
;'5
01
: The custom paper menu items are not
accessible.
;'5
: The custom paper menu items appear
(see below).
70+61(/'#574'
+0%*'5
(110V printers)
or
/+..+/'6'45
(220V printers)
+0%*'5
/+..+/'6'45
This item appears only when
%10(+)74'
%7561/2#2'4 ;'5
. Select the unit of
measurement for the custom paper size.