HP LaserJet 4000 Printer series - Manual (Page 85)

74 Chapter 4: Problem Solving
EN
(.#5*(+.'
12'4#6+10(#+.'&
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
(.#5*(+.'
5;56'/+5(7..
Delete files from the flash disk DIMM or add another one. Download
or delete files from HP JetAdmin, and download or delete fonts from
HP FontSmart. (See the software help for more information.)
(.#5*+5
94+6'2416'%6'&
The flash disk DIMM is protected, and no new files can be written to it.
Disable the write protection through HP JetAdmin.
+0276&'8+%'
%10&+6+10ZZ[[
An input paper handling device has a condition that needs attention
before printing can resume.
See the documentation that came with the paper handling device for
assistance.
+056#..64#;Z
The printer is unable to print the current job, because the specified
tray (
Z
) is open or not inserted correctly.
Re-insert the specified tray.
.1#&+0)
241)4#/ PWODGT
alternates with
&1016219'41((
Programs and fonts can be stored on the printer’s file system. At
bootup time these entities are loaded into RAM. (These entities can
take a long time to load into RAM depending on the size and number
of entities being loaded.) The
PWODGT
specifies a sequence
number indicating the current program being loaded.
/#07#..;(''&
=6;2'?=5+<'?
Load the requested paper into Tray 1.
Press [Go] if the desired paper is already loaded in Tray 1.
Press [-Value+] to scroll through the available types and sizes. Press
[Select] to accept the alternate type or size.
/'/14;(7..
5614'&&#6#.156
There is no available memory in the printer. The current job might not
print correctly and some resources (such as downloaded fonts or
macros) might have been deleted.
You might want to add more memory to the printer.
Printer Messages (Continued)
Message Explanation or Recommended Action