Ag Leader PF3000Pro Harvest & Application Operators Manual - Manual (Page 10)

General PF3000 Pro
Ag Leader Technology
July 2003 1-6
When some display items (like swath) are selected, an up and down arrow
symbol will appear on the right of the display line. This indicates you can
change the setting of the item with the UP or DOWN ARROW keys. After
you have made the change you must press the key to the right of the display
line to deselect the line.
Menu Key The MENU key switches the menus on the bottom of the display. There are
two main menus that you can view by pressing the MENU key. They are
shown below.
It is recommended to display the FIELD, LOAD, MAP, and MARKS menu
during normal operation of the monitor, unless you are marking and
therefore need to display marks on the bottom.
Main Menus:
FIELD
LOAD
SHOW
MAP
OPTIONS
CAL SETUP DIAG
Menu Selection
Keys The name above the four menu selection keys on the bottom of the display
will change depending on what you are doing on the monitor.
The bottom RIGHT and LEFT ARROW keys are used to view additional
menu or display items. If you see a right and left arrow symbol on the
display above the bottom RIGHT and LEFT ARROW keys, this indicates
you can press the bottom RIGHT and LEFT ARROW keys to view more
menu or display items. Refer to Figure 2.