Ag Leader PF3000Pro Harvest & Application Operators Manual - Manual (Page 126)

Direct Drive – Mark III/Mark IV PF3000 Pro
Application Rate Mode Ag Leader Technology
July 2003 2-112
Setup for Direct
Drive of Mark III,
IV, IV.2 and IV.4
drive
CAUTION: When hydraulics are turned on to the hydraulic
drive, the conveyor is ready to run. To prevent serious
injury to you or others KEEP CLEAR OF MOVING
PARTS.
A separate configuration of settings should be created for every product
applied. A maximum of 16 different configurations can be created. The
screen below illustrates two configurations for a New Leader controller
1.
Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear.
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
Lime New Leader N/A
Fert #60 New Leader N/A
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key. Set the following:
Controller Make: Set to DIRECT.
Controller Model: Set to NEW LEADER.
Product: Press EDIT key. You can select an existing product
and press ACCEPT key or create a new product by pressing
CREATE NEW key. Press EDIT NAME key and enter name of
product. Use Left or Right Arrow keys to select a character. Use
Up or Down Arrow key to change the character. To erase a
character in the name, highlight that character and use UP or
DOWN ARROW key to scroll to the blank space between "9"
and "A". Set each character and press ACCEPT key twice.