Ag Leader PF3000Pro Harvest & Application Operators Manual - Manual (Page 194)

Grain Type PF3000 Pro
Harvest Mode Ag Leader Technology
July 2003 4-36
Introduction The monitor must be set on a grain type when harvesting. You can have
more than one grain in a field.
Press the SETUP key and GRAIN key to make changes to the settings for a
grain. Refer to the grain setup instructions in the setup section of the
manual.
Setting/Changing To set or change the grain perform the following steps.
Grain Type Step Action
1 Press the FIELD key twice to display the FIELD in large text. Use
the UP or DOWN ARROW keys to scroll to the field that you
what to change the grain.
2 Press the key to the right of the line displaying the grain to select
the grain.
3 Use the UP or DOWN ARROW keys to set the grain. Press the
ACCEPT key twice. Once to accept the new grain and once to
accept the field.
Note: If you change a grain on a field that already has loads for another
grain type, the monitor will create a new set of loads for the new grain type.
Refer to the example below. To view the loads of the other grain, you must
change the grain on the field back to the old grain type.
Example:
Corn Soybeans
F10 L1 F10 L1
L2 L2
L3 L3
L4 L4
* * *