Ag Leader PF3000Pro Harvest & Application Operators Manual - Manual (Page 160)

Fields and Loads PF3000 Pro
All Modes Ag Leader Technology
July 2003 4-2
Recommendations All the information recorded by the PF3000 Pro must be recorded in a field
and load. The field and load that the monitor is set on is found on the top
line of the main operating screen.
Fields
You should at least create all the fields and name them before you begin to
use the PF3000 Pro. The monitor will use the same set of fields you create
for each operating mode (harvest mode, application rate mode, site
verification mode) of the monitor. You can create and name your fields
using any operating mode. You should choose field names that you can use
year after year.
Loads
It also recommended to create and name loads within fields before you use
the PF3000 Pro. Each operating mode of the PF3000 Pro will have its own
set of loads for each field (except, currently site verification loads are the
same as harvest loads).
Definition:
Load: A load is used to subdivide a field into smaller sections. The
monitor load is not associated with the combine tank, wagon, or truck load.
Field
Load