Ag Leader PF3000Pro Harvest & Application Operators Manual - Manual (Page 150)

Calibrating Stop Height PF3000 Pro
(Harvest Mode) Ag Leader Technology
July 2003 3-20
Step Action
1 Use the UP or DOWN ARROW keys to select the grain.
2 Press the ENTER HEIGHT key.
STOP HEIGHT CALIBRATION: SOYBEANS
STOP HEIGHT SETTING:
0
CURRENT STOP HEIGHT:
60
SET
HEIGHT
CAL
C1
CAL
DISTANCE
EXIT
Step Action
3 Move the combine head to the height at which you want the monitor
to stop counting area.
4 Press the SET HEIGHT key. The monitor will automatically set the
stop height setting equal to the current stop height. Press the
ACCEPT key.
5 Press the EXIT key twice to return to the main operating screen.
NOTE: You can manually adjust the stop height number by pressing the
UP or DOWN ARROW key when the screen above is displayed.
* * *