Innovate Motorsports LC-2 User Manual

Page 8

background image


- Calibrate once per race weekend
Dyno use
- Calibrate new sensor
- Calibrate every 2-3 days, depending on usage


Software (LogWorks 3 and LM Programmer)


Download the Logworks 3 software package

1. Open your web browser and go to:

2. The LogWorks 3 software download will be the very first thing on the

page, click the link to download the software.


Installing software

1. Double click on the Logworks 3 installer previously downloaded.
2. The installer will start, follow the prompts to install the software.

3. Once the software has been installed the LogWorks software, LM

Programmer and LC-2 manual can then be located by navigating
through Start->Programs->LogWorks3.


Connecting to LM Programmer

LM Programmer is used to update firmware, change fuel types, and program
the two analog outputs.

1. Connect the OUT port of the LC-2 to the provided serial

programming cable. Connect the other end of the serial
programming cable to your computer. If your computer does not
have a serial port, you can purchase a USB to Serial adapter from