Factory reset – Nitrous Express DRAG-Pro N2O User Manual
Page 26
Advertising
25
Davis Technologies TM-4000-Drag-PRO V3 n
2
0 2010
Factory Reset
All settings can be restored to Factory Defaults at
any time by following these steps.
1.
Set the “Mode” dial to “5”
2.
Hold down the “Test” button
3.
Turn the power On
4.
While holding the “Test” button down, move
the “Mode” dial to the “Off“ position.
5.
Release the “Test” button,
The LED will flash rapidly to indicate the Factory
Settings have been restored.
Advertising