Nitrous Express Octane Series Progressive User Manual
Page 12
SCROLL DOWN:
This setting enables or disables the rich side cutout only. You can toggle the setting by pushing the
control button while it is highlighted.
SCROLL DOWN:
This setting enables or disables the lean side cutout only. You can toggle the setting by pushing the
control button while it is highlighted.
SCROLL DOWN:
This is your lean threshold for the cutout. If you have ENABLED the lean cutout, the output will shut
down if you go leaner than this setting. Pushing the control button in will turn the area grey and you
can scroll up or down to the correct value. Push the control button in again to save.
SCROLL DOWN:
This is your rich threshold for the cutout. If you have ENABLED the rich cutout, the output will shut
down if you go richer than this setting. Pushing the control button in will turn the area grey and you
can scroll up or down to the correct value. Push the control button in again to save.
SCROLL DOWN:
This sets the time that either the lean or rich condition must exist for before a cutout will happen.
Pushing the control button in will turn the area grey and you can scroll up or down to the correct
value. Push the control button in again to save. [0 – 1 sec]
SCROLL DOWN:
Push the control button in to save.
Push the control button in again to exit.
S
S
T
T
E
E
P
P
9
9
.
.
H
H
E
E
A
A
T
T
E
E
R
R
T
T
a
a
r
r
g
g
e
e
t
t
Push control button in and enter the HEATER Target screen.