Nitrous Express Octane Series Progressive User Manual
Page 13
SCROLL DOWN:
This is your target pressure for your bottle heater. The heater will turn off above
this setting. It also has a safety that disables the heater if the pressure did not
rise after 15 mins or if the pressure drops too low. Pushing the control button in
will turn the area grey and you can scroll up or down to the correct value. Push
the control button in again to save.
SCROLL DOWN:
Push the control button in to save.
S
S
T
T
E
E
P
P
1
1
0
0
.
.
N
N
I
I
T
T
R
R
O
O
U
U
S
S
S
S
e
e
t
t
u
u
p
p
Push the control button in to enter the NITROUS Setup screen
SCROLL DOWN:
This is the ramp reset/resume option. This tells the gauge to either resume your ramp [PAUS-Y] or
reset to beginning [PAUS-N]. EXAMPLE: while ramping you lift off the gas and then step back into it,
you can either have the ramp continue where you left off or restart from the beginning. You can
toggle the setting by pushing the control button while it is highlighted.
SCROLL DOWN:
This is the First Gear Delay. Enabling this feature in RPM based mode will
prevent the nitrous from activating until the first time your RPM exceeds Rpm
Max [first gear lockout]. In Time based mode, it delays the nitrous from
activating for set delay time or until the your RPM exceeds Rpm Max, which
ever comes first. Once you have exceeded Rpm Max, the delay time is ignored
until the gauge is either reset or re-armed. You can toggle the setting by
pushing the control button while it is highlighted.