Nitrous Express Octane Series Progressive User Manual
Page 6
SCROLL Down:
This is the LOW change color. Your gauges RPM numbers will change from green to yellow at this
point. Push the control button and it will turn grey and you can make your adjustments as needed.
Push the control button again to save it.
SCROLL DOWN:
This is your LOW side range for the tach. To change this number up or down push the control button
and it turns to grey allowing you to change the value. Push the control button when you get to the
desired RPM. Again, this number is for the resolution of your tach scaling only, nothing more. A
typical setting would be 500RPM below your idle. Push the control button to save.
SCROLL DOWN:
This is your Shift Light Enable or Disable. Push the control button and it will toggle this setting.
SCROLL DOWN:
This is the Shift Light RPM. You gauge is the shift light. The entire screen will jump to a solid color
telling you it is time to shift. Pushing the control button will toggle the color to grey. Make your
adjustment to up or down to fit your needs. This is the RPM point your shift light will come on. Push
the button again.
SCROLL DOWN:
You have finished programming the RPM input for your gauge. Push the control button in again and
you will EXIT the RPM input menu and return to the INPUT main menu.
S
S
T
T
E
E
P
P
5
5
.
.
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
I
I
n
n
p
p
u
u
t
t
s
s
-
-
A
A
R
R
M
M
.
.
With ARM highlighted, push the control button and you will enter the ARM input menu.
In this menu you set the gauge to arm if you are triggering your nitrous system with a positive
+12v source trigger.