Alpine IVA-D300 - Manual (Page 29)

27
-EN
Display example for DVD setup screen
5
Touch [RETURN] to return to the previous screen.
Touch [MAIN CONT.] to return to the main source screen
that was displayed before the setup operation was
started.
• Immediately after inputting titles or changing the settings of DVD
mode (while the system is inputting the titles or data automatically)
do not turn the ignition key (engine key) to OFF.
Otherwise, a title may not be written, or the settings may not be
changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (The language
setting is not effective on some discs. If not, the default language is
set from the factory.)
• When the settings are changed, the old settings are overwritten. Make
a note of the current settings before making changes. The settings are
not cleared even when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do
so from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 21).
• If the disc does not include the selected language, the disc’s default
language is set.
Continued
Setup
DVD Setup
DVD Setup Operation
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with
the ignition key in the ACC or ON position. To do this, follow
the procedure below.
1. Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2. Keep pushing the foot brake and release the parking
brake once then engage it again.
3. When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission
lever in the Park position.
Now, the locking system for the DVD mode operation has
been released. Engaging the parking brake can reactivate
the DVD mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above
procedure (1 through 3), of “To display the DVD mode
screen.”
Each time the ignition is turned OFF, perform the procedure
of “To display the DVD mode screen.”
The DVD Setup operation can be carried out after removing
the disc from the unit.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for
details.
1
Touch [SYS.] on the main source screen.
The SYSTEM selection screen is displayed.
2
Touch [SETUP].
The SETUP screen appears.
3
Touch [ ] of DVD SETUP.
The DVD setup screen appears.
4
Touch [;] or [:] of the desired item to change its
setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE
/ COUNTRY CODE / PARENTAL / DIGITAL OUT MODE /
OPTICAL OUT / TV SCREEN
Numeric keypad input screen
The numeric keypad is used if you want to
play back in a language other than that
displayed, or to input your parental lock
password, etc.
Touch [;] or [:] to set a desired language.
Touch [CODE] to display the
numeric keypad screen. Touch [ ] or [ ] to turn
pages of setting items.