Alpine IVA-D300 - Manual (Page 73)

71
-EN
1 Antenna Extension Cable
2 Digital Output Terminal (Optical)
Use when combining fiber digital input compatible
products.
3 Power Supply Connector
4 DC/DC Converter
• Do not install the converter at a location subjected to water such
as under the floor mat or air conditioner. This may cause a
malfunction.
• Do not bundle the DC/DC converter cable with other audio cables.
Also, do not install the cables directly next to the unit. Doing so
may induce noise into your system.
• Keep the DC/DC converter away from the Antenna cables and the
rear side of the unit, otherwise noise may be generated when
receiving radio broadcast.
5 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
6 Fuse Holder (10A)
7 Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare metal
and is securely fastened using the sheet metal screw
provided.
8 Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
the IVA-D300 to dim whenever the vehicle‘s lights are
turned on.
9 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.
! Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
" Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect
to the plus side of the car's reverse lamp that lights when
the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
# Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch
panel-compatible rear monitor.
$ Monitor Extension Cable (Included)
% Remote IN/OUT Terminal
& Display Output Terminal
( System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
• Be sure to turn the power off to the unit before changing the switch
position.
) Antenna Receptacle
~ AUX Input Terminals/AUX Output Terminals
If these terminals are connected to the optional expansion
box (VPE-S431), the AUX input and output terminals are
not used on this unit. Connect AUX IN 1, 2 and 3, and the
AUX OUT 1 and 2 terminals of the expansion box (VPE-
S431) to the external device(s).
+ AV Select Connector
When this connector is connected to the optional
expansion box (VPE-S431), connect this to the HEAD
UNIT terminal of VPE-S431.
, Ext. Output Connector
If this connector is connected to the optional Amplifier
Link compatible monaural Amplifier, connect this to the
optional Amplifier Link Box, and output the Amplifier Link
control signal.
- Ai-NET Connector
Connect this to the output or input connector of other
product (CD changer, Equalizer, etc.) equipped with Ai-
NET.
. Front input/output Terminal
Use when connecting an amplifier or Equalizer.
/ Rear input/output Terminal
Use when connecting an amplifier or Equalizer.
: Subwoofer output Terminal
Connect the input lead of an amplifier for the subwoofer to
this terminal.
; Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
< Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
= Audio Interrupt In Lead (Pink/Black)
> Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals
to the IVA-D300.
? Foot Brake Lead (Yellow/Black)
Connect to the vehicle's foot brake lead or brake lamp
lead.
@ Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
[ Fuse Holder (10A)
\ Right Front (+) Speaker Output Lead (Gray)
] Right Front (–) Speaker Output Lead (Gray/Black)
^ Right Rear (–) Speaker Output Lead (Violet/Black)
_ Right Rear (+) Speaker Output Lead (Violet)
{ Left Rear (+) Speaker Output Lead (Green)
| Left Rear (–) Speaker Output Lead (Green/Black)
} Left Front (–) Speaker Output Lead (White/Black)
V Left Front (+) Speaker Output Lead (White)