Alpine IVA-D300 - Manual (Page 58)

56
-EN
To listen to the answer-phone or to input numbers:
1 In the CONNECT display, touch [10KEY].
The Dial Sending and numeric keypad displays appear.
2 Touch and input a desired number or symbol.
3 Touch [RTN] to return to the previous screen.
7
To cut the call, touch [ ]. Or the call is
automatically cut in 5 seconds after finishing.
The screen returns to the previous source mode.
• If [RETURN] is touched within 5 seconds of cutting the call, the
Telephone menu display appears.
• When the call is cut, touching [ ] dials the number again.
Calling by the address book
From your vehicle, call from the address book registered in the
portable telephone.
The operation may be carried out only when vehicle is parked.
1
Touch [ ] on the main source screen.
The Speed Dial display appears.
2
Touch [RTN] on the numeric keypad input screen
to close the numeric keypad screen.
The Telephone menu display appears.
3
Touch [PHONE BOOK].
The Phone Book list appears.
4
Touch [CALL] of a desired addressee on the list.
• By touching [ ] or [ ], the names are listed in alphabetical order.
• If no data is in the PHONE BOOK, "NO MEMORY" is displayed.
Touch [RETURN] to return to the Telephone menu display.
5
Touch [ ] to place the call.
6
To cut the call, touch [ ]. Or the call is
automatically cut in 5 seconds after finishing.
Calling by the outgoing / incoming /
absent incoming history
You can place a call to one of the last 999 calls by the outgoing/
incoming/absent incoming history.
1
Touch [ ] on the main source screen.
The Speed Dial display appears.
2
Touch [RTN] on the numeric keypad input screen
to close the numeric keypad screen.
The Telephone menu display appears.
3
Touch any one of the buttons [DIALED CALL],
[MISSED CALL] or [RECEIVED CALL].
DIALED CALL: Outgoing history list display
MISSED CALL: Absent incoming history list display
RECEIVED CALL: Incoming history list display
• If no history is registered to any of the lists, “NO MEMORY” is
displayed.
To return to Telephone menu display, touch [RETURN].
Telephone Reception
1
When this unit receives a call, the screen is
switched to RINGING display of Telephone mode.
2
When AUTO call (setting of AUTO/MANUAL call
page 31) is selected, CONNECT display appears
and this unit enters AUTO call mode in 3 seconds
after receiving.
3
To cut the call, touch [ ] . Or the call is
automatically cut in 5 seconds after finishing.
The screen returns to the previous source mode.
To input any number or symbol during call:
1 Touch [10KEY] in the CONNECT display.
The numeric keypad screen is displayed.
2 Touch and input a desired number or symbol.
3 Touch [RTN] to return to the previous screen.
4 Touch [
] to start a call.
Calling
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers
registered in No. 1 to 9 of the address book.
1
Touch [ ] on the main source screen.
The Speed Dial and the numeric keypad displays appear.
2
Touch any one of the buttons [1] through [9] in
which the telephone numbers are recorded.
• A call is sent directly by touching and holding any one of the
recorded buttons [1] to [9] for at least 2 seconds.
3
Touch [ ] to start call.
4
To cut the call, touch [ ]. Or the call is
automatically cut in 5 seconds after finishing.
• If no telephone number is registered in the selected function button,
"NO PRESET" is displayed for 5 seconds.
Touch [RETURN] to return to the Telephone menu.
• When [SPEED DIAL] is touched in the Telephone menu display,
the Speed Dial display appears.
Dial call
Input the telephone number using the dial.
1
Touch [ ] on the main source screen.
The Speed Dial display appears.
2
Touch [RTN] on the numeric keypad input screen
to close the numeric keypad screen.
The Telephone menu display appears.
3
Touch [DIRECT CALL].
The Direct Call and numeric keypad displays appear.
4
Touch and input the telephone number.
5
Touch [ENT].
6
Touch [ ] to start call.
• The call is cut in 5 seconds after “NO NETWORK COVERAGE” is
displayed.