Alpine IVA-D300 - Manual (Page 37)

35
-EN
Setting Automatic Background Textures
Turn on the Automatic Background Texture Scroll to automatically
change background texture. The background texture will change each
time the ignition key is turned off and turned back on again (5
textures).
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
ON: Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1 → MODE2 → MODE3 → MODE4 →
MODE5 → MODE1
OFF: Turn off the Auto Background Texture Scroll mode.
Setting the Font Type
You can choose a character (text and tag information, etc.) font type
for the main display.
Setting item: FONT TYPE
Setting content: FONT 1 / FONT 2
FONT1:Selects bold characters.
FONT2:Selects round characters.
Switching the Font Back Display Color
You can choose from 5 different display colors for the font back
(source title, shortcut display, etc.).
Setting item: FONT COLOR
Setting contents: MODE 1 to MODE 5
Turning the Touch Panel Vibration ON or OFF
You can turn the touch panel’s vibration ON or OFF during operation.
Setting item: TOUCH PANEL
Setting content: NORMAL / FORCE
NORMAL: Turns off vibration during operation.
FORCE:
Turns on vibration during operation.
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content: / RESET
1 Touch [ ] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the mark provided in the upper
right corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the mark, touch
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
i-Personalize TM
Media Xpander Function
Setting the MX mode
To display the i-Personalize mode screen:
To watch a video source, your vehicle must be parked with
the ignition key in the ACC or ON position. To do this, follow
the procedure below.
1. Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2. Keep pushing the foot brake and release the parking
brake once then engage it again.
3. When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission
lever in the Park position.
Now, the locking system for the i-Personalize mode
operation has been released. Engaging the parking brake
can reactivate the i-Personalize mode, as long as the car's
ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display
the i-Personalize mode screen.”
Each time the ignition is turned OFF, perform the procedure
of “To display the i-Personalize mode screen.”
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The radio, CD, and MP3, will be able
to reproduce the music clearly even in cars with a lot of road noise.
1
Touch [SYS.] on the source main screen.
The SYSTEM selection screen is displayed.
2
Touch [i-Personalize].
The screen changes to the i-Personalize.
3
Touch [;] or [:] of MEDIA XPANDER to turn MX
ON or OFF.
OFF: MX mode is canceled for all music sources.
ON: The selected MX mode is turned on.
4
After setting to ON, touch [ ].
The screen changes to the Media Xpander setting screen.
Continued