Alpine IVA-D300 - Manual (Page 46)

44
-EN
Adjustment Procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
Setting the Speakers
1
Check that Defeat mode is off (page 22).
2
Touch [SYS.] on the main source screen.
The SYSTEM selection screen is displayed.
3
Touch [i-Personalize].
The i-Personalize screen appears.
4
Touch [ ] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [ ] of SPEAKER SELECT.
The SPEAKER SELECT screen appears.
6
Set the connected speaker by touching the
respective [;] or [:] button.
FRONT1: OFF/FULL (Full Range)/TW (Tweeter)
FRONT2: OFF/ON
REAR:
OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
7
Touch [RETURN] to return to the previous screen.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 48).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is
connected.
1
Check that Defeat mode is off.
2
Touch [SYS.] on the main source screen.
The SYSTEM selection screen appears.
3
Touch [i-Personalize].
The i-Personalize screen will appear.
4
Select ON or OFF of MX by touching [;] or [:] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
5
Touch [ ] after setting to ON.
The Media Xpander setup screen appears.
Speaker Setup (page 48)
(Turning the speakers to be used on and off and
setting their response)
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel (page
48)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
Adjusting the acoustic image (page 48)
(Adjusting the acoustic image to achieve a sound as
if the center speaker were directly in front of the
listener)
Achieving powerful high volume sound (page
49)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
Adjusting the DVD Level (page 49)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 49)
(Storing all the settings and adjustments made on the
IVA-D300 (not only the above settings/adjusts) in the
memory)
B
B
B
B
B
B
1
2
3
4
5
6
7