Sper Scientific 850061 pH SD Card Datalogger Kit - Manual (Page 14)

- 14 -
SETUP MODE
2. Press ▲ or ▼ to select yes
(format the SD memory card) or
no (do not format the SD memory
card). Press ENTER to confirm
your selection. If selecting yes,
“yES Enter” will appear on the
LCD, press ENTER again and the
meter will format the SD card.
Real Time Clock
1. Enter the clock function from
Setup Mode (see page 13). “dAtE”
appears on the LCD.
2. Press ENTER. The year will flash
on the LCD.
3. Press ▲ or ▼ to adjust the value.
Press ENTER to save the value.
4. Repeat Step 3 to adjust the
month, date, hour, minute and
second.
5. Press SET to complete the clock
setup function.